Interpolation Circuit AM-IP4k
Features
| Interpolation rate 4 … 4096 | Signal shape correction |
| Input frequency max. 220kHz | Jitter suppression |
| Input range 75mVpp … 1000mVpp | Output signals: ABZ, SPI, SSI |
| Adjustable input low pass filter 10kHz … 250kHz | EEPROM, multiturn counter, reference mark adjustment |
| Constant delay time for all resolutions | Power supply 3.3V |
| Patented internal gain and offset control | Temperature range -40°C … +125°C |
The interpolation circuit AM-IP4k serves to increase the resolution of incremental position and angular measuring systems with sinusoidal output signals. The input signals are subjected to a AMAC-patented internal gain and offset control and the signal period will be divided from 4 up to 4096 times. The ICs comprise three instrumentation amplifiers with adjustable gain factors. Incremental encoders which possess a voltage interface and measuring bridges up to 1Vpp can be connected directly. Sensors with current interface and photodiode-arrays are adapted by a simple external circuit. The IC operates with both single-ended or differential input signals. The noise of the sensor signals is prevented by a switching analog filter. Additionally, a digital hysteresis can suppress the edge noise of the output signals at low input frequencies and at standstill. The AM-IP4k is the first AMAC interpolator with implemented jitter suppression filter for ABZ outputs. The quality of the signals issued by the sensors is monitored in the ICs. For that purpose it is possible to activate 9 different error signals indicating the type of the error. For the calculation of the position a set of sensor or scale specific coefficients for a 360 degree correction (rotary encoder) and a signal shape correction (both linear and rotary encoder) can be placed in the EEPROM of the IC. In that way, harmonics of the sinusoidal signals or inaccuracies of the measuring scale do not lead to errors in the position value.
The three integrated output interfaces ABZ, SPI, SSI and further features like the multi stage trigger signal processing, integrated timer, integrated multiturn counter, the processing of distance coded reference marks, the possibility to adjust the reference mark as well as adjustment and storage of the zero position make the ICs suitable for direct use in industrial controls or in fast multi-channel positioning measuring systems. With these features the ICs are also prepared for use in absolute positioning measuring systems. The AM-IP4k can be configured according to specific applications using the integrated EEPROM or via the serial interface (SPI).
Technical Data
Interfaces
| Analog input |
Sinusoidal / cosinusoidal / reference (index) signals, differential or single-ended Adjustable amplification for 1 Vpp / 500 mVpp / 250 mVpp / 75 mVpp Input frequency max. 220kHz for all resolutions |
| ABZ | 90° square-wave sequences (A/B/Z) Adjustable width of zero signal Z to ¼ or 1 period A/B Service signals for sensor adjustment |
| SPI | 30-bit counter value / 16-bit multiturn value / 9-bit sensor state Up to 25MHz, compatible to Standard-SPI 16 bit Up to 500 000 measurement values per second Signal filter for suppression of disturbances |
| SSI | 30-bit counter value / 16-bit multiturn value / 2-bit sensor state Gray code / binary code Adjustable timing, SSI ring operation Interface width configurable for 20bit or 32bit. Up to 5 MHz |
Interpolation / Signal Processing
| Interpolation rate | 4 … 4096 user-defined interpolation table storable in EEPROM |
| Signal adjustment |
Patented digital controller for the offset, control range ±10% of the standard amplitude Patented digital controller for the amplitude, control range 60% … 120% of the standard amplitude Digital potentiometer with 64 steps for phase correction; selectable range ±5° or ±10° Input signal monitoring with configurable error indication 360 degree correction (rotary encoder) signal shape correction within Sin/Cos period (both linear and rotary encoder) correction coefficients storable in EEPROM |
| Interference suppression | Adjustable low pass filter 10 kHz, 75 kHz, 250 kHz Digital hysteresis for suppression of the edge noise at the output Selectable minimum edge distance at the output (bandwidth limitation) |
| Reference signal processing | Adjustable reference mark position in 32 steps 0 … 360° Definition of the optimum reference position via SPI or service signals Processing of distance coded reference marks Measured-value trigger at the reference mark position |
| Miscellenious | 2-stage measured value trigger Zero-signal and teach-signal for adjustment and storage of zero position of the sensor Multiturn counter Constant delay time for all resolutions controlled current output configuration via Integrated EEPROM or SPI interface |
Important Characteristics
| Package | QFN56 (8 x 8 mm) |
| Operating Voltage |
3,3 V |
| Temperature Range |
-40 … +125 °C |
| Interface Frequency | SPI 25 MHz, SSI 5 MHz |
Downloads
|
Infosheet
|
Datasheet
|
Software
|
Ordering Information
| Product type | Description | Article Number |
| AM-IP4k | Interpolation circuit AM-IP4k, QFN56 | PR50400-10 |
| USB to SPI-Adapter | USB-Adapter to SPI-Interface | PR44025-10 |